Can-Am ATV Forum banner
Status
Not open for further replies.

Renegade xxc bead locks

1.5K views 5 replies 4 participants last post by  Maxwelll  
#1 ·
A friend in mine has a 2013 renegade 1000 xxc and he is wanting to swap the tires off his rincon over to the Rene the tires are 26/10/12 and 26/12/12 mud lite xl will he need to buy longer bolts to bolt the bead locks back together or is there much difference in the sidewalks of the stock tires and the mudlites? If he needs longer bolts where can he buy the from? And will he have any issues rubbing the from shocks?
 
Save
#2 ·
Bolts will be fine (beadlock ring bolts) I have 29.5 outlaws on and they worked.
The front will have lots of clearance, and the rear might be fine. I had to install 1" wheel spacers in the rear so the outlaw lugs wouldn't rub in the shock reservoir.
 
Save
#4 ·
i swapped my stock tires for mudlites and they fit fine. it was a bit tough to get started but the bolts fit fine.

Use wd40 or some type of lube to get tires off xxc rims.
 
Save
#6 ·
I went in a circle when I did it going a little at a time to keep even pressure. I ended up going around the rim 3 times total.
 
Save
Status
Not open for further replies.
You have insufficient privileges to reply here.